ASCODW
ASCOD

The ASCOD armoured fighting vehicle family is the product of a cooperation agreement between Austrian Steyr-Daimler-Puch AG and Spanish General Dynamics Santa Bárbara Sistemas. The ASCOD family includes the LT 105, a light tank equipped with a 105 mm gun, a SAM launcher, an anti-tank missile launcher, mortar carrier, R&R vehicle, Command & Control vehicle, ambulance, artillery observer, and the AIFV model. In Spanish service, the vehicle is called "Pizarro", while the Austrian version is called "Ulan".

ASLAVW
ASLAV

The Australian Light Armoured Vehicle (ASLAV) is an eight-wheeled amphibious armoured reconnaissance vehicle used by the Australian Army. It was built by General Dynamics Land Systems Canada, and developed from the Canadian Army's LAV-25 and Bison armoured fighting vehicles.

Coyote Reconnaissance VehicleW
Coyote Reconnaissance Vehicle

The Light Armoured Vehicle II Coyote is an armoured car built by General Dynamics Land Systems Canada for the Canadian Forces, for use in the light reconnaissance (scout) role. It was also initially used in the role of medium tank trainer within armoured cavalry squadrons in the same way as the AVGP Cougar it replaced. In service since 1996, the Coyote is a later generation of the LAV-25 and is of the same family as the Bison APC and the Australian ASLAV, as all are part of the Light Armoured Vehicle family produced by General Dynamics Land Systems - Canada and based on the MOWAG Piranha 8x8.

Expeditionary Fighting VehicleW
Expeditionary Fighting Vehicle

The Expeditionary Fighting Vehicle (EFV) was an amphibious assault vehicle developed by General Dynamics during the 1990s and 2000s for use by the U.S. Marine Corps. It would have been launched at sea, from an amphibious assault ship beyond the horizon, able to transport a full Marine rifle squad to shore. It would maneuver cross country with an agility and mobility equal to or greater than the M1 Abrams.

General Dynamics AjaxW
General Dynamics Ajax

The Ajax, formerly known as the Scout SV, is a family of armoured fighting vehicles being developed by General Dynamics UK for the British Army.

General Dynamics FlyerW
General Dynamics Flyer

The Flyer Advanced Light Strike Vehicle platform has been developed by General Dynamics Ordnance and Tactical Systems (GD-OTS), in partnership with Flyer Defense LLC, for the U.S. Special Operations Command (SOCOM) Ground Mobility Vehicle Program. The Flyer Advanced Light Strike Vehicle platform configurations are the Flyer 72 and the narrower Flyer 60.

LAV IIIW
LAV III

The LAV III, originally named the Kodiak by the Canadian Army, is the third generation of the Light Armoured Vehicle (LAV) family of infantry fighting vehicles built by General Dynamics Land Systems – Canada (GDLS-C), a London, Ontario based subsidiary of General Dynamics that first entered service in 1999. It was developed in Canada from the LAV II family and is the primary mechanized infantry vehicle of both the Canadian Army and the New Zealand Army. It also forms the basis of the Stryker vehicle used by the US Army and other operators.

LAV-25W
LAV-25

The LAV-25 is an eight-wheeled amphibious armored reconnaissance vehicle built by General Dynamics Land Systems and used by the United States Marine Corps and the United States Army.

M1 AbramsW
M1 Abrams

The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense. Conceived for modern armored ground warfare and now one of the heaviest tanks in service at nearly 68 short tons, it introduced several innovative features, including a multifuel turbine engine, sophisticated Chobham composite armor, a computer fire control system, separate ammunition storage in a blow-out compartment, and NBC protection for crew safety. Initial models of the M1 were armed with a licensed-produced 105 mm Royal Ordnance L7 gun, while later variants feature a licensed Rheinmetall 120 mm L/44.

M60 AVLBW
M60 AVLB

The M60 AVLB is an armored vehicle based on the M60 Patton main battle tank's hull and used for the launching and retrieval of a 60-foot (18 m) scissors-type bridge. The AVLB consists of three major sections: the launcher, the vehicle hull, and the bridge. The M60 AVLB or Armored Vehicle Launched Bridge was introduced in 1963. This combat engineer vehicle was developed by the US Army Engineer Research & Development Laboratories under contract with General Dynamics to replace the previous M48 AVLB. It was designed to launch bridge for tanks and other wheeled combat vehicles across trenches and water obstacles in combat conditions. A total of 400 armored bridge launchers and bridges were built. 125 M60 AVLBs of all variants were constructed.

M60-2000 Main Battle TankW
M60-2000 Main Battle Tank

The General Dynamics Land Systems (GDLS) M60-2000 or 120S was an upgrade of the M60 Patton tank. The development of the M60-2000 was primarily due to the large number of M60 Main Battle Tanks in service with many Middle Eastern nations unable to afford a sufficient force of more modern main battle tanks. The upgrade was marketed at those M60 users with the industrial capability to convert the tanks themselves. The M60-2000/120S was a GDLS supplied conversion kit that married the M1A1 turret of the M1 Abrams to the M60A1 hull of the M60 Patton, offering many features of the M1A1 Abrams to existing M60 users at a reduced cost.

M104 WolverineW
M104 Wolverine

The M104 Wolverine Heavy Assault Bridge is an armored military engineering vehicle created by General Dynamics Land Systems, designed to provide deployable bridge capability for units engaged in military operations.

M728 Combat Engineer VehicleW
M728 Combat Engineer Vehicle

The M728 Combat Engineer Vehicle (CEV) is a full-tracked vehicle used for breaching, obstacle removal, and pioneering operations. Production commenced in 1965 and ceased in 1987. A total of 312 of all variants of these armored engineer vehicles were produced.

M1074 Joint Assault BridgeW
M1074 Joint Assault Bridge

The M1074 Joint Assault Bridge System (JABS) is an armored military engineering vehicle based on the Abrams M1A1 main battle tank. The M1074 was designed by Leonardo DRS Technologies to provide deployable bridge capability for units engaged in military operations.

M1126 Infantry Carrier VehicleW
M1126 Infantry Carrier Vehicle

The M1126 Infantry Carrier Vehicle (ICV) is an armoured personnel carrier and part of the Stryker family of vehicles used by the United States Army and Royal Thai Army.

M1127 Reconnaissance VehicleW
M1127 Reconnaissance Vehicle

The M1127 Reconnaissance Vehicle is a wheeled armored personnel carrier in the Stryker family. It is in service with the US Army.

M1128 Mobile Gun SystemW
M1128 Mobile Gun System

The M1128 Mobile Gun System is an eight-wheeled armored car of the Stryker armored fighting vehicle family, mounting a 105 mm tank gun, based on the Canadian LAV III light-armored vehicle manufactured by General Dynamics Land Systems. It is in service with the United States and was also being considered for adoption by several other countries.

M1129 Mortar CarrierW
M1129 Mortar Carrier

The M1129 Mortar Carrier is an 8×8 wheeled armored mortar carrier of the Stryker family of combat vehicles produced by General Dynamics Land Systems. It is in use with the United States Army.

M1130 Commander's VehicleW
M1130 Commander's Vehicle

The M1130 Commander Vehicle (CV) is an armored command vehicle based on the Stryker platform. It is used within the brigade to provide means to receive information, analyze and transmit data, and control forces carrying out combat missions.

M1131 Fire Support VehicleW
M1131 Fire Support Vehicle

The Fire Support Vehicle (FSV) of the Stryker series provides automated enhanced surveillance, target acquisition, target identification, target tracking, target designation, position location and communications functionality. Targets will be transmitted instantly to the fire support system and shooter.

M1132 Engineer Squad VehicleW
M1132 Engineer Squad Vehicle

M1132 Engineer Squad Vehicle (ESV) is the combat engineering variant of the Stryker wheeled armored fighting vehicle. It is issued to combat engineer squads in the US Army Stryker brigade combat teams.

M1133 Medical Evacuation VehicleW
M1133 Medical Evacuation Vehicle

The Medical Evacuation Vehicle (MEV) are assigned from the Battalion Aid Station for Battalion-sized units, and dedicated to each of the company-sized elements of the unit and provide treatment for serious injury and advanced trauma cases.

M1134 Anti-Tank Guided Missile VehicleW
M1134 Anti-Tank Guided Missile Vehicle

M1134 Anti-Tank Guided Missile Vehicle is a U.S. armored fighting vehicle from the Stryker family of vehicles. As the brigade's primary tank destroyer system, the ATGM reinforces the brigade's infantry battalions, reinforces the brigade reconnaissance squadron and provides long-range direct fire.

M1135 Nuclear, Biological, Chemical, Reconnaissance VehicleW
M1135 Nuclear, Biological, Chemical, Reconnaissance Vehicle

The M1135 Nuclear, Biological, Chemical Reconnaissance Vehicle (NBCRV) provides nuclear, biological and chemical detection and surveillance for battlefield hazard visualization.

Mowag Piranha VW
Mowag Piranha V

The Piranha V Infantry Fighting Vehicle (IFV) is one variant of the fifth generation of the Mowag Piranha family of vehicles. It was designed by General Dynamics European Land Systems - Mowag GmbH.

StrykerW
Stryker

The ICV Stryker is a family of eight-wheeled armored fighting vehicles derived from the Canadian LAV III. Stryker vehicles are produced by General Dynamics Land Systems for the United States Army. It has 4-wheel drive (8×4) and can be switched to all-wheel drive (8×8).